Cyclone Dust Collectors, Skimmers and Spin Pre Separators Meet Wet Dust Collection Challenges
When industrial or process dust is a problem, a reliable dust collection system is essential for providing a safe work environment. Dust collection becomes more challenging in applications involving hot, sticky or other difficult to manage dusts. Wet dust collectors are required to manage the problem safely. Nederman MikroPul collectors offer an optimal way to manage the hot, moist gas streams, and sticky dusts that standard dust collection systems cannot handle.
G Squared Supplies WET Dust Collector Needs in the Gulf Coast Region
The highly experienced G Squared team is ready to assist you in implementing your wet dust collection solution. Taking into consideration factors such as location, temperature, power availability, as well as site data analysis, we will identify the wet dust collection system that will best meet your needs.
Advantages G Squared offers you as your Gulf Coast wet dust collection supplier:
- Strong technical competency in dust collection equipment
- Knowledgeable and responsive customer service
- Competitive pricing and deliveries
- Assistance with system design
- Installation & set up assistance
Our team offers you the best combination of performance, quality, and value to assure the long-term efficiency and reliability of your process. Contact G Squared to discuss your wet dust collection needs.
Cyclone and Baghouse
- Cyclone Dust Collectors
- Spin Pre Separator
G Squared partners with Nederman MikroPul to offer high efficiency cyclone dust collectors. Cyclone dust collectors offer the most cost-effective solution for separating dry particulate (5 microns or larger) from gas streams.
Cyclone dust collectors serve as pre-separators to reduce the dust load reaching the final filter, or as protective devices to remove large hot particles from the gas or air stream to prevent damage to the filter material.
Cyclone dust collectors have higher running costs since they require more energy. Lower efficiency cyclones are often more effective when used together with a final filter or dust collector, as they allow a better mix of particle sizes to reach the filter material, which can help to extend the useful working life of the filter material.
Benefits of Using a Cyclone:
- Low initial cost
- Low operating expenses
- No moving internal parts
- Minimal space requirements
Nederman MikroPul can also custom design the following enhancements as required:
- Internal surface finishes to minimize abrasion
- Build-up caused by sticky particulate
- Ease of access
- Body flanges
- Wear liners, fixed or removable
- Refractory lining for wear or high temperatures
- ASME coded construction
- Stainless steel or more exotic alloy construction
- Powder coatings
- Plastic Fines
- Chip collection
- Iron and steel
- Sand recovery
Mining and Industrial Steel
- Crushing plants
- Material handling
- Carbon collection
- Metal powder
- Soybean fines
- Pulverized coal collection
- Coal ash
Skimmers are modified cyclones for high air volumes that can take the place of two standard cyclones.
- Product receiving
The advantage will be with high air volumes. You can reduce the amount of Pre Separators. (1 Skimmer instead of 2 cyclones).A budget pre-separator is a great option for long ducting runs. Also, adding a pre-separator to your single-stage dust collector will increase its efficiency, saving you time and money. Pre-separators save time because they are easier to empty than a bag collector.Over time, your dust collector will last longer since the impeller won’t be under the constant stress of heavy chips, or damaging scraps of metal. It also extends the life of your filter bags because they will only be filtering out dust, not collecting chips.